Product information "Thrustmaster - TCA Captain Pack Airbus Edition" Become the pilot with the complete TCA cockpit pack, containing the exact replica of the Airbus sidesticks und the quadrant (incl. the add-ons). Enjoy stunningly realistic flights all around the world! Even more realistic and immersive flying! Exclusive precision thanks to H.E.A.R.T (HallEffect AccuRate Technology) - magnetic sensors Extreme precision (e.g. 14-bit-resolution fort he TCA Sidestick and 16-bit resolution for the TCA Quadrant) Magnet technology guarantees highest precision that does not decrease after prolonged use Operate your plane precisely with the TCA Sidestick! Ambidextrous and modular control stick with 4 interchangeable head button modules that lets you choose between 4 different Configurations (right or left seat in a commercial airplane, narrow or wide control stick configuration for smaller aircrafts). Ergonomic replica oft he Airbus sidestick (type A320) with integrated thrust lever axis and a thrust reversing mechanism 17 action buttons with unique Braille signature! 12 buttons on the base, 4 on the stick and 1 virtual button on the thrust lever (on the lower 20% oft he axis) New 8-way point-of-view head switch for maximum precision 4 independent axes with twist-rudder (controlled by rotating the stick) Selector switch allows configuration oft he 12 buttons on the base in both left-handed and right-handed positions weighted base for improved stability 17 action buttons with unique "Braille" signature! 12 buttons on the base, 4 on the stick and 1 virtual button on the thrust lever (on the bottom 20% of the axis). New 8-way point-of-view head switch for highest precision Control your takeoffs, flights and landings with confidence! Ergonomic replica of an Airbus thrust lever quadrant for absolutely realistic takeoffs and landings: Thrust levers similar to those of Airbus aircrafts with a thrust reversal mechanism and authentic locks ("Idle" / "Climb" / "Flex" / "TO/GA") levers for the airbrakes and the landing flaps with realistic locks for precise control of all flight sequences Iconic Airbus controls including 2 engine master switches, trim, landing gear, autobreak and parking break 4 axes + 31 action buttons (including 13 virtual buttons) two thrust lever quadrants can be combined (additional thrust lever quadrant sold separately), giving you access to four thrust levers instead of two! Thrust lever with two axes + connection port for Thrustmaster T.Flight Rudder Pedals (sold seperately) Native integration with Microsoft Flight Simulator 2020 Plug-and-play: the device is detected automatically in-game Compatability overview Compatible with PC (Windows® 10) Compatible with the following rudder controls (sold seperately): Thrustmaster T.Flight Rudder Pedals (TFPR) and Thrustmaster Pendular Rudder (TPR) Compatible with the TM Flying Clamp (sold seperately) Package contents 1 x TCA Sidestick Airbus Edition 1 x TCA Quadrant Airbus Edition + 2 x add-on modules: Brake and landing flaps 4 x interchangeable joystick button modules 1 x USB cable (type C to type A) + 2 x Thrustmaster SATA cable 4 x connectors + 1 x mounting rod 2 x stickers Quick start guide + Warranty information Product dimensionsTCA Sidestick Airbus Edition Height: 195 mm Width: 195 mm Depth: 225 mm TCA Quadrant Airbus Edition (with TCA Quadrant add-ons) Height: 85 mm Width: 190 mm Depth: 235 mm

Read more less

The CS 737X CDU from Cockpit Part Aviation Technology Co. Ltd is a unique and outstanding peripheral device to control the FMC in your personal home cockpit! The device works as a standalone plug and play module and is compatible with all major flight simulator platforms.The CS 737X CDU is simply and only connected to a USB port to get working. No need for an HDMI or VGA connection! The USB cable is included. Once connected to the PC, just open the bridge software to connect it to the simulator and enjoy your flight! Unboxing this product takes longer than getting it to work in the simulator as the setup can be done literally in a few seconds. The unit comes with an adjustable aluminium desktop stand that holds the unit in a realistic angle and position for easy operation. Bridge software can be downloaded for free. Its haptic and design complete an absolute realistic feeling. Features: Realistic design and haptic works like the real aircraft Brightness regulation Completely standalone module No configuration required Plug & Play connection via USB and hot-swap No external VGA or HDMI connection required Integrated full-colour TFT-LCD screen (high resolution and contrast) Zero lag synchronization Works with Prepar3D, FSX, X-Plane 11 and Microsoft Flight Simulator (soon) Compatible with all major add-ons: FSX: PMDG 737NG PMDG 747 PMDG 777 Prepar3D V1-V5: PMDG 737NGX PMDG 737NGXu PMDG 747 PMDG 777 X-Plane 11 ZIBO 737-800 IXEG 737-300 MSFS Coming soon Technical data: Dimensions: 228 x 145,8 x 32 mm Weight: 500 g To use the hardware please download the Bridge Software here! System requirments Windows 7 / 10 (64-bit) USB 2.0 port or higher Bridge Software required

Read more less

Honeycomb - Bravo Throttle Quadrant Available | Only while stocks last With the Bravo Throttle Quadrant, Honeycomb Aeronautical presents a universally usable all-in-one cockpit system. The throttle quadrant allows for configurations from small single-engine planes to four-engine airliners. It supports various cockpit systems like autopilot, annunciator panel, gear switch, flaps, and trim.The thrust levers can be configured for small single- and multi-engine planes with separate flap switches. For use in an airliner, you can choose a configuration with two or four thrust levers, levers for spoiler and flaps. This will then also allow you to control the thrust reverser. Download the latest Honeycomb Config Tool here: MSFS: AS_HONEYCOMB_MSFS.zip P3D V5: AS_HONEYCOMB_P3DV5_V2.zip P3D V4: AS_HONEYCOMB_P3DV4_V2.zip P3D V3: AS_HONEYCOMB_P3DV3_V2.zip FSX: AS_HONEYCOMB_FSX-FSXSE-V2.zip X-Plane 11 Mac: AS_HONEYCOMB_XP11_MAC_V2.zip X-Plane 11 Windows: AS_HONEYCOMB_XP11_WIN_V2.zip Here you find various videos with explanations, tips and tutorials for Honeycomb's Alpha Flight Controls & Bravo Throttle Quadrant: https://www.youtube.com/playlist?list=PL-CM2J7huv9GsJLInEaXS71CKKU_5g3Sl The autopilot panel includes the usual functions as can be found in commercial and GA aircraft. The annunciator panel with 14 signal lights shows the most important status and warning messages of the board systems.Additional features are provided by the gear switch, the trim wheel, and 7 freely programmable switches so the user does not need to reach out to the keyboard as often. Features: Throttle quadrant for GA planes and airliners Configuration options for single and multiple engines Configuration options for piston and jet engines Thrust reverser for two- and four-engine aircraft Extensive autopilot Annunciator panel with 14 lights Gear switch and trim wheel 7 programmable keys 2-year warranty and free lifetime support Mounting points and brackets for other Honeycomb and Saitek products Designed and developed in California by pilots and aerospace engineers Compatible with: Microsoft Flight Simulator (Version 2020) Microsoft Flight Simulator X (FSX) Lockheed Martin Prepar3D (P3D) X-Plane 11 (XP) Awards/Reviews: Conclusion by X-Plained.com:"Back to the Honeycomb Bravo Throttle Quadrant; only one word fits it all; an awesome piece of hardware! Although the name suggests that we’re dealing with a throttle device for flight simulators, it actually offers much more than only a throttle unit. Besides throttles for GA single and multi-aircraft, it also comes with a set for commercial aircraft and it also offers an annunciator light panel and AP panel." Read review Related links to "Honeycomb - Bravo Throttle Quadrant"   Do you have any questions concerning this product?   Further products by Honeycomb   System requirements USB port Operating system: Microsoft Windows 10 (64bit) or macOS (Catalina+) Compatible with: Microsoft Flight Simulator (2020), Microsoft Flight Simulator X, Lockheed Martin Prepar3D V3-V5, X-Plane 11

Read more less

The Honeycomb Bundle (Yoke & Throttle) includes the Honeycomb - Alpha Flight Controls and the Bravo Throttle Quadrant!Buy the Honeycomb Bundle and save! In the bundle you get the two package components cheaper than buying them separately. Honeycomb Aeronauticals Alpha Flight Controls is one of the most advanced yokes currently available for PC flight simulation. It was designed to fulfil the requirements of both flight simulation users and student or full-time pilots. The aerospace grade internal components feature realistic ergonomics for a true flying experience. The high-quality mechanics offer a realistic full 180° turn radius with a self-centring mechanism with no dead zone to control the aileron. Lenghtwise, the steel shaft allows for 15 cm of travel. The mechanism is all metal for durability. The Yoke has a switch panel with master, alternator, avionics, and light switches. It is equipped with red LED backlight to easily operable at night. Furthermore, it includes an ignition switch as can be found in piston engine aircrafts. On the left handle you will find two buttons, two 2-way hat switches, and a push to talk button, while the right handle features two 2-way and an 8-way switch as well as a button. Due to suitable mounting points and brackets, the Alpha Flight Controls are compatible with other Honeycomb and Saitek products.The included driver and configuration software comes with individual profile settings for various aircrafts and is compatible with Windows and macOS. Features: Aerospace grade internal components Realistic ergonomics 180° turn radius, self-centring Switch panel with backlight Numerous switches and buttons Durable construction 2-year warranty and free lifetime support Mounting points and brackets for other Honeycomb and Saitek products Designed and developed in California by pilots and aerospace engineers With the Bravo Throttle Quadrant, Honeycomb Aeronautical presents a universally usable all-in-one cockpit system. The throttle quadrant allows for configurations from small single-engine planes to four-engine airliners. It supports various cockpit systems like autopilot, annunciator panel, gear switch, flaps, and trim. The thrust levers can be configured for small single- and multi-engine planes with separate flap switches. For use in an airliner you can choose a configuration with two or four thrust levers, levers for spoiler and flaps. This will then also allow you to control the thrust reverser. The autopilot panel includes the usual functions as can be found in commercial and GA aircraft. The annunciator panel with 14 signal lights shows the most important status and warning messages of the board systems. Additional features are provided by the gear switch, the trim wheel, and 7 freely programmable switches so the user does not need to reach out to the keyboard as often. Features: Throttle quadrant for GA planes and airliners Configuration options for single and multiple engines Configuration options for piston and jet engines Thrust reverser for two- and four-engine aircraft Extensive autopilot Annunciator panel with 14 lights Gear switch and trim wheel 7 programmable keys 2-year warranty and free lifetime support Mounting points and brackets for other Honeycomb and Saitek products Designed and developed in California by pilots and aerospace engineers Download the latest Honeycomb Config Tool here: MSFS: AS_HONEYCOMB_MSFS.zip P3D V5: AS_HONEYCOMB_P3DV5_V2.zip P3D V4: AS_HONEYCOMB_P3DV4_V2.zip P3D V3: AS_HONEYCOMB_P3DV3_V2.zip FSX: AS_HONEYCOMB_FSX-FSXSE-V2.zip X-Plane 11 Mac: AS_HONEYCOMB_XP11_MAC_V2.zip X-Plane 11 Windows: AS_HONEYCOMB_XP11_WIN_V2.zip

Read more less

The RealSimGear Garmin GNS430 bezel provides ultra-realistic buttons and knobs for use with the 430 GPS Nav/Comm. This is the best way to learn the functionality of the Garmin 430 and is much more realistic than using the mouse or a touch screen. This product is especially helpful for learning and practicing instrument flying procedures in your personal flight simulator.  When coupled with virtual ATC like PilotEdge or VatSIM this provides the most realistic simulation possible.  This allows you to develop familiarity with the Garmin 430 interface and controls so you can be better prepared for actual lessons with your CFII. This unit features its own 3.5" LCD screen that is used to display the Garmin 430 pop out screen from X-plane. Installation is simple, there is no assembly, 3D printing, wiring or soldering required, this product comes fully assembled.  The unit can be panel mounted in your home simulator or sits on your desktop. Includes: GNS430 unit USB cable Features: Tactile rubber buttons allow you to use the Garmin 430 in the same way as you would in a real aircraft High quality concentric encoders with their own push buttons replicate the feel and function of the Garmin 430 knobs Change your comm radio frequencies quickly and easily, no more fumbling with the mouse Make your sim training more effective and representative of real world flying For XPlane 11, Prepar3D V3 & V4, FSX and FSX: Steam Plugin software is provided for XPlane 10 & 11, P3D V3 & V4 and FSX. Note P3D and FSX require Reality-XP GNS430 or the Mindstar GNS430 (sold separately through Reality XP or Mindstar) Compatible with Microsoft Flight Simulator (2020) default aircrafts, please read this for more information regarding this functionality

Read more less

The RealSimGear GCU47X is a replica of the GCU found in most Cirrus SR20 and SR22 aircraft equipped with the Perspective avionics package. Also compatible with the HotStart TBM900. Includes: GCU47X unit USB cable

Read more less

Modeled after the autopilot unit found in Cirrus SR20/SR22 aircraft, this autopilot includes functioning rubber buttons for all modes, as well as indicator LED's that reflect the operating mode.  The wheel also functions to allow you to adjust target indicated air speed, vertical speed or altitude. The unit connects to your PC with a single USB cable and works with the same RealSimGear plugin software that is used for our other products. Includes: GFC700 Autopilot unit USB cable

Read more less

The RealSimGear Garmin GTN650 bezel provides an ultra-realistic NAV/COM touchscreen interface for your flight simulator. This is the best way to learn the functionality of the GTN650 and is much more realistic than using the mouse. This product is especially helpful for learning and practicing instrument flying procedures.  When coupled with virtual ATC like PilotEdge or VatSIM this provides the most realistic simulation possible.  This allows you to develop familiarity with the Garmin GTN650 interface and controls so you can be better prepared for actual lessons with your CFII. This unit features its own high quality, high resolution (1920x1080) LCD display that is used to display the Reality-XP GTN650 pop out screen. Includes: GTN650 unit Power pack HDMI right angle adapter USB cable Features: Integrated touch screen Responsive, hi-res (1920x1080) touch screen enables all of the GTN650 on screen functions, connects via HDMI and USB Fully assembled & enclosed No assembly, 3D printing, soldering etc required, comes fully enclosed and ready to mount in your panel (desktop bracket coming soon) Fully functional knobs and tactile buttons Rubber buttons match the feel of the real device Change your comm radio frequencies quickly and easily No more fumbling with the mouse, allowing you to develop muscle memory and proficiency for instrument flying Make your sim training more effective And representative of real world flying Desktop or panel mount For flying students, pilots and home cockpit builders For XPlane, Prepare3D V3 & V4, FSX: Steam Edition Plugin software is provided for XPlane, P3D V3 & V4 and FSX: Steam Edition. Requires Reality-XP GTN650. Note the touch screen driver is for Windows only. Dimensions Carefully matched to the real thing at 158 mm x 68 mm and will sit 22 mm in front of your panel surface. Installation is simple, there is no assembly, 3D printing, wiring or soldering required, this product comes fully assembled.  The unit can be panel mounted in your home simulator, sits on your desktop or can be used with our optional desktop stand (coming soon).

Read more less

The RealSimGear GMA Audio Panel Add-on allows you to control which COM or NAV radio source is heard while flying.  The unit features rubber buttons and LED indicators that display which COM or NAV radio is being monitored and which COM radio is being used for transmission.  This unit significantly increases the level of realism when using virtual ATC services such as PilotEdge.The other buttons and the volume knob, while not used in X-Plane, are available for mapping to other functions if desired. The following items are included: GMA Audio Panel Panel Mounting attachments USB cable for connection to Gen 4 G1000 MFD/PDF module Available separately: GMA Side Bracket available for mounting onto single G1000 PFD Stand and/or GMA Mid Bracket for mounting between two G1000 modules NOTE: This product is only usable with the RealSimGear G1000 PFD/MFD.

Read more less

The RealSimGear GMA350 Audio Panel allows you to control which COM or NAV radio source is heard while flying. The unit features rubber buttons and LED indicators that display which COM or NAV radio is being monitored and which COM radio is being used for transmission. This unit significantly increases the level of realism when using virtual ATC services such as PilotEdge. The other buttons and the volume knob, while not used in X-Plane are available for mapping to other functions if desired. Specifications: Dimensions: 158mm (w) x 32mm (h) x 84mm (d) Includes: 1x GMA350 Audio Panel Unit 1x USB Cable

Read more less

The RealSimGear Garmin GTN750 bezel provides an ultra-realistic NAV/COM interface for your flight simulator. This is the best way to learn the functionality of the GTN750 and is much more realistic than using the mouse. This product is especially helpful for learning and practicing instrument flying procedures. When coupled with virtual ATC like PilotEdge or VatSIM this provides the most realistic simulation possible. This allows you to develop familiarity with the Garmin GTN750 interface and controls so you can be better prepared for actual lessons with your CFII. This unit features its own high-quality LCD screen that is used to display the Reality-XP GTN750 pop out screen. Includes: GTN750 unit Power pack HDMI right angle adapter USB cable Features: Integrated touch screen Responsive touch screen enables all of the GTN750 on screen functions, connects via HDMI and USB Fully assembled & enclosed No assembly, 3D printing, soldering etc required, comes fully enclosed and ready to mount in your panel (desktop bracket coming soon) Fully functional knobs and tactile buttons Rubber buttons match the feel of the real device Change your comm radio frequencies quickly and easily no more fumbling with the mouse, allowing you to develop muscle memory and proficiency for instrument flying Make your sim training more effective and representative of real world flying Desktop or panel mount For flying students, pilots and home cockpit builders. Note the desktop stand is available as an optional accessory here. For XPlane, Prepar3D V3 & V4, FSX: Steam Edition Plugin software is provided for X-Plane, P3D v3 & v4 and FSX Steam Edition. Requires Reality-XP GTN750. Note the touch screen driver is for Windows only. Dimensions Carefully matched to the real thing at 158mm x 160mm and will sit 22mm in front of your panel surface.

Read more less